3IN1 Tyre tripling machine-13INCH

With this excellent machine, you can easily load approximately 3,000-3,200 tires into a 40-foot container, which can even reduce transportation costs by two-thirds. It is very suitable for making packages of 3 or 4 tires, but can also make packages of 6 or more tires. When used properly, the 3IN1 tyre bundling machine is safe for both operators and tires.

3IN1 Tyre tripling machine range:
1. The machine's table can accommodate commercial tires with a maximum diameter; 
2. The diameter of the outer tire must be the same as or larger than the inner tire (e.g., 16′′ -> 16′′, 18′′ -> 17′′).
3. Any tire with a diameter smaller than 14 inches must be the last tire in the packaging (the tire in the center of the packaging). It is impossible to install another tire onto a 14-inch or smaller tire because the lower jaw is too close and the vertical push rod does not fit between them;
4. The width of each tire into which another tire is inserted must be at least 10 mm larger than the inserted tire (e.g., 215 -> 205).